Switching from a 90mm to a 100mm stem
A 90mm to 100mm stem swap (same angle) moves the handlebar clamp +9.8mm and +1.9mm on the synthetic baseline frame. Synthetic baseline frame (stack 560 mm, reach 385 mm, head angle 73°). As of 2026-09-12, method 1.1.0.
Keeping the frame, head angle, total steerer rise, and stem angle unchanged, only stem length changes from 90mm to 100mm (center to center).
| Measurement | Before: 90mm stem | After: 100mm stem | Change |
|---|---|---|---|
| Forward from bottom bracket | 461.7 mm | 471.5 mm | +9.8 mm |
| Height above bottom bracket | 615.4 mm | 617.3 mm | +1.9 mm |
- Clamp offset
- 10 mm
- Matching stem length
- 90 mm
- Matching stem angle
- -6°
A cockpit calculation cannot guarantee fit, comfort, safe component installation, or handling. Validate the setup with a qualified fitter or mechanic. This worked example uses the site's synthetic baseline frame, not a specific manufacturer model. Recompute with your own frame stack, reach, and head angle before acting on it.
Open this comparison in the calculator The link prefills the before/after fields above using the tool's plan-share link format (#plan=).