Switching from a 80mm to a 120mm stem
A 80mm to 120mm stem swap (same angle) moves the handlebar clamp +39.3mm and +7.6mm on the synthetic baseline frame. Synthetic baseline frame (stack 560 mm, reach 385 mm, head angle 73°). As of 2026-09-12, method 1.1.0.
Keeping the frame, head angle, total steerer rise, and stem angle unchanged, only stem length changes from 80mm to 120mm (center to center).
| Measurement | Before: 80mm stem | After: 120mm stem | Change |
|---|---|---|---|
| Forward from bottom bracket | 451.8 mm | 491.1 mm | +39.3 mm |
| Height above bottom bracket | 613.5 mm | 621.1 mm | +7.6 mm |
- Clamp offset
- 40 mm
- Matching stem length
- 80 mm
- Matching stem angle
- -6°
A cockpit calculation cannot guarantee fit, comfort, safe component installation, or handling. Validate the setup with a qualified fitter or mechanic. This worked example uses the site's synthetic baseline frame, not a specific manufacturer model. Recompute with your own frame stack, reach, and head angle before acting on it.
Open this comparison in the calculator The link prefills the before/after fields above using the tool's plan-share link format (#plan=).